Single-component silicone sealant in cartridge with acetic cross-linking, resistant to weathering, ageing and UV radiation. Excellent workability and adhesion to ceramic substrates. Available in transparent and coloured versions.
The calculation is based on the actual volume to be filled and the product density.
The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).
Enter the name of your project
Saved project!
Elastic joint design
a - width of joint
from 0 to 4 [mm]
from 5 to 9 [mm]
from 10 to 20 [mm]
from 21 to 40 [mm]
greater than 40 [mm]
b - depth of joint
increase the width of the joint
b = a
b = 10 [mm]
b = a/2[mm]
reduce the width of the joint
To set the depth of the joint and prevent sealant adhering to the bottom, insert MAPEFOAM closed-cell, extruded foam polyethylene cord, supplied in rolls in various lengths according to the diameter of the cord, down into the joint.
Technical data sheet
