Single-component, thixotropic, high elastic modulus, quick-hardening hybrid elastic sealant and adhesive. Specifically formulated for sealing fractioning joints on both horizontal and vertical surfaces.
Also recommended as an elastic adhesive for all common building materials, even heterogeneous ones, to replace or supplement mechanical fixings. Also for damp substrates.
F.47 MONOFLEX ECO is a thixotropic adhesive and sealant made from silylated polymers and therefore free of silicone and isocyanates.
The calculation is based on the actual volume to be filled and the product density.
The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).
Enter the name of your project
Saved project!
Elastic joint design
a - width of joint
from 0 to 4 [mm]
from 5 to 9 [mm]
from 10 to 20 [mm]
from 21 to 40 [mm]
greater than 40 [mm]
b - depth of joint
increase the width of the joint
b = a
b = 10 [mm]
b = a/2[mm]
reduce the width of the joint
To set the depth of the joint and prevent sealant adhering to the bottom, insert MAPEFOAM closed-cell, extruded foam polyethylene cord, supplied in rolls in various lengths according to the diameter of the cord, down into the joint.
Technical data sheet
